If your crew still sorts scrap metal by hand, you are losing time and money every shift. A hydraulic magnet for sale connects directly to your excavator’s hydraulic circuit and lets one operator do the work of several ground workers. YG Machinery designs and manufactures excavator-mounted electromagnetic lifting systems tested to CE and ISO 9001 standards. We have supplied excavator attachments to contractors and recyclers across Southeast Asia, the Middle East, and Europe. No separate power unit is needed. Once attached, your machine can pick up, move, and release ferrous metal in seconds. Whether you run a scrap yard, a demolition site, or a road construction project, YG has a hydraulic magnet for sale sized for your excavator.
Hydraulic Magnet for Excavator – Model Parameters
The table below shows the three standard models available. Each model suits a different excavator tonnage range. All models operate at 20 MPa working pressure and accept 100–500 V input, making them compatible with most hydraulic generator brands including dynaset magnet systems. If you are comparing options, these specs help you evaluate which hydraulic magnet for sale best matches your machine and workload.
| Model | 1000T | 1200T | 1300P |
| Weight | 1450kg | 1950kg | 2150kg |
| Dimension | 1000*1350*1150mm | 1200*1650*1150mm | 1300*1750*1150mm |
| Magnet Power | 7000gs | 8000gs | 10000gs |
| Work Pressure | 20Mpa | 20Mpa | 20Mpa |
| Hydraulic Oil Flow | 45L/min | 75L/min | 85L/min |
| Generator Power | 8000W | 15000W | 20000W |
| Voltage | 100-500V | 100-500V | 100-500V |
| Applied Excavator | 12-18T | 18-25T | 25-36T |
Not sure which model fits your machine? Contact our team with your excavator tonnage and we will recommend the right unit right away.
Excavator Mounted Magnets – Suitable and Unsuitable Working Conditions
Before purchasing, it helps to know where the magnet performs well and where it does not. This section gives you a clear picture so you can make the right decision.
Where Excavator Mounted Magnets Work Best
Excavator mounted magnets deliver strong results in ferrous metal environments. Below are the most common and effective applications:
- Scrap yards – daily loading of shredded steel, rebar bundles, and mixed ferrous debris onto trucks.
- Demolition sites – pulling rebar and steel beams from broken concrete quickly and safely.
- Road and bridge projects – collecting and repositioning steel mesh or cast iron drainage covers.
- Port and logistics yards – moving bulk steel plates or pipe sections with speed and precision.
In each of these settings, the magnet reduces manual labor significantly and speeds up the entire loading cycle.
Where the Magnet Is Not the Right Tool
However, the hydraulic magnet does have limits. Here are situations where a different attachment may serve you better:
- Non-ferrous metals – copper, aluminum, brass, and stainless steel are not magnetic. A mechanical grapple works better here.
- Heavily waterlogged environments – excessive submersion may reduce magnetic efficiency beyond the unit’s rated protection level.
- Precision placement tasks – thin or lightweight components that require delicate handling are not ideal candidates for magnet use.
Knowing these limits upfront helps you avoid misapplication and protects your investment.
How a Hydraulic Magnet for Sale Reduces Your Construction Costs
Cost control is one of the biggest reasons contractors choose a hydraulic magnet for sale over traditional methods. The savings appear in several areas almost immediately.
- Lower labor costs – One operator with a magnet attachment can replace three to five ground workers sorting scrap by hand. That cuts daily wage costs considerably on most projects.
- Shorter project timelines – Faster metal handling reduces total project duration. Shorter timelines mean lower equipment rental costs and less fuel consumption overall.
- Less bucket wear – Instead of digging into hard scrap piles, the magnet lifts materials cleanly. This extends bucket life and lowers maintenance costs over time.
- Factory-direct pricing – YG Machinery sells with no distributor markups. Most customers recover the purchase cost within a few months based on labor savings alone.
Over a typical project cycle, the return on investment is clear and measurable.
Improve Handling Efficiency With a Magnet for Trackhoe
Beyond cost savings, a magnet for trackhoe applications improves handling speed and precision across job sites. The efficiency gains show up in several key areas.
- Faster pick-and-release cycles – A hydraulic magnet picks up a load in under five seconds and releases it just as fast. That cycle repeats hundreds of times per shift without operator fatigue, unlike manual methods using chains or slings.
- Accurate material placement – For paving and infrastructure projects, the magnet handles steel mesh panels during road reinforcement work. Operators position mesh sections accurately without ground crew assistance, reducing injury risk near heavy loads.
- 360-degree rotation control – The YG hydraulic magnet supports full rotation on compatible rotator brackets. This gives the operator precise directional control in tight urban job sites or confined spaces.
- Stable magnetic power all shift – The dynaset magnet compatible voltage input of 100–500 V ensures consistent magnetic force throughout the full working shift. Consistent power means fewer dropped loads and smoother operations from start to finish.
YG Excavator Hydraulic Magnets for Sale – Get Yours Today
YG Machinery is a professional manufacturer of excavator attachments with years of export experience serving clients in over 30 countries. Every hydraulic magnet for sale in our lineup goes through load testing and electrical inspection before leaving the factory. We offer three standard models as shown above, and custom sizes are available for special applications. All products carry CE certification and meet ISO 9001 standards. We ship globally and provide full after-sales support including spare parts and technical guidance. When you choose a hydraulic magnet for sale from YG, you get factory-direct value with reliable quality backing every unit. Send us your excavator model and tonnage, and we will provide a tailored recommendation and competitive price within 24 hours. Contact us now to request a free quote or speak with our technical team via WhatsApp or email.
In addition to hydraulic magnets, YG Machinery also offers a full range of excavator attachments to meet different job site needs:
- Excavator Orange Peel Grapple
- Drum Cutter Machine
- Hydraulic Shears for Excavator
- Excavator Pile Driver
- Hydraulic Pile Breaker
- Integrated Rock Drill and Splitter
Whatever your application, our team is ready to help you find the right attachment. Reach out today and let us support your next project.
